FCC ID 2ANDR-RC508

1 image
Device - ID Label - FCC ID 2ANDR-RC508

ID Label

FCC Device Certification Details
Device Note
Osmo FrameTap
Company
SZ DJI Osmo Technology Co.,Ltd.
Grantee Code
2ANDR
Location
China
Frequency
2402 MHz - 2480 MHz
Purpose
Original Equipment
Grant Date
Dec 17, 2025
Description
The Osmo FrameTap, identified by the trademark DJI, model RC508, and FCC ID 2ANDR-RC508, is a portable wireless device manufactured by SZ DJI Osmo Technology Co., Ltd. This device is equipped with comprehensive dual-band wireless communication capabilities. For Wi-Fi connectivity, it operates in both the 2.4 GHz and 5 GHz bands. In the 2.4 GHz spectrum (2402-2480 MHz), it supports 802.11b/g/n (HT20) and 802.11ax (HEW20) standards. In the 5 GHz band (5725-5850 MHz), it supports modern high-speed protocols including 802.11n (HT40), 802.11ac (VHT40), and 802.11ax (HEW20, HEW40), enabling versatile and high-performance data transfer. In addition to its Wi-Fi functionality, the device incorporates Bluetooth Low Energy (BLE 1M) for low-power communication, operating in the 2.4 GHz band with GFSK modulation. All wireless transmissions for these protocols are handled by a single, integrated PCB antenna with a specified gain of 1.7 dBi. The Osmo FrameTap features a screen-based user interface, which allows users to navigate menus and access device information, such as its electronic compliance label, directly on the display. As a portable device intended for general population use, it has been evaluated for RF exposure compliance.
Company Intelligence
Hardware3
ESMTMicronNordic Semiconductor ASA
See and export all companies / devices using a specific partUpgrade
Technologies8
Mechanical Gimbal StabilizationSoftware Defined Radio (SDR)Advanced Wireless Communication (Wi-Fi 802.11ax, Bluetooth LE, 5G NR)Frequency Hopping Spread Spectrum (FHSS)Multiple-Input Multiple-Output (MIMO) antenna systemsGFSK, DQPSK, and 8DPSK ModulationInverted-F Antenna (IFA) designMiniaturized Camera Imaging Systems
See and export (CSV) all companies using same techUpgrade
Product Portfolio6
Handheld gimbal cameras (Osmo Pocket, Osmo Nano)Smartphone gimbals (Osmo Mobile series)Professional camera stabilizers (DJI RS series)Wireless microphone systems (DJI Mic series)360-degree cameras (OSMO 360)Wireless video transmission accessories (Osmo FrameTap, SDR Transceivers)
See and export (CSV) all companies with similar productsUpgrade
Similar Companies8
Guilin Feiyu Technology Incorporated CompanyShenzhen Hohem Technology Co., Ltd.Arashi Vision Inc.Shenzhen FIMI Robot Technology Co., LtdShenzhen Huisheng Technology Co., LtdFY Innovations Technology Co.,LtdGoPro, Inc.SZ DJI TECHNOLOGY CO., LTD
See and export (CSV) all look-alikesUpgrade
Unlock More
Receive alerts when company certifies a new deviceUpgrade
Reveal business and engineering contactsUpgrade
VP of EngineeringHead of EngineeringCEOCTO
Dec 23, 2025

DJI Poised to Launch 'Mic Mini 2S Transmitter' as New Compact Audio Solution Surfaces in FCC Filings

In a major reveal for the content creator community, filings with the U.S. Federal Communications Commission (FCC) have confirmed the existence of a new audio product from DJI, officially named the "DJI Mic Mini 2S Transmitter." This discovery, unearthed from public test reports, points to an upcoming expansion of DJI's highly successful wireless microphone lineup. The "Mini 2S" name strongly suggests a new device focused on a smaller, more compact form factor, potentially as a...

↑ Back to top
Similar News
Available Documents

Filing Documents

Dec 22, 2025

DJI Prepares to Launch 'Osmo 360 II' Camera With Wi-Fi 6, Advanced Dual-Antenna System

In a significant development for the action and 360-degree camera market, public FCC filings have revealed the existence of a new device from DJI: the 'OSMO 360 II.' The documents confirm a next-generation camera is on the way, packed with modern technology and poised to be a major upgrade for content creators. While DJI remains silent, the comprehensive testing and specifications detailed in the filings paint a clear picture of a powerful, fully engineered device...

Read report→

ID Label/Location Info

Label
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
The provided text details how to access compliance information for a device with FCC ID 2ANDR-RC508. This information is available through the device's E-label, accessible by swiping down from the top of the screen, tapping the settings icon, and navigating to "Compliance Info." The device, identified as Model RC508, is manufactured by SZ DJI Osmo Technology Co., Ltd. It adheres to Part 15 of the FCC Rules, meaning it must not cause harmful interference and must accept any received interference. The text also notes compliance with CAN ICES-003(B) - NMB-003(B).
FCC ID 2ANDR-RC508 ID Label/Location Info page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Dec 20, 2025

DJI Preparing Major Leap With New 'SDR Transmission 2' Transceiver Featuring Integrated 5G Connectivity

In a major revelation for the drone and camera gimbal market, new FCC filings have unveiled DJI's next-generation transmission system, the "SDR Transmission 2 Transceiver." In a massive update to their product line, this new hardware moves beyond traditional RF links by integrating 5G cellular connectivity directly into the device. This breakthrough technology, detailed in filings for device model DST-2, points to a future where DJI drones and gimbals have virtually unlimited range and can stream high-quality video directly to the internet from anywhere with a cell signal, representing the most...

Read more →

Cover Letter(s)

Authorization Letter
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
The document is a letter from SZ DJI Osmo Technology Co.,Ltd., dated 2025-11-14, to the Federal Communication Commission regarding FCC ID: 2ANDR-RC508. The company authorizes SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen branch and Keny Xu to act on their behalf in all matters relating to equipment authorization applications for FCC ID: 2ANDR-RC508. SZ DJI Osmo Technology Co.,Ltd. certifies that they are not subject to denial of federal benefits. They acknowledge that full responsibility for compliance with certification terms remains with them, even when the agent signs the application. This authorization is effective until further written notice.
FCC ID 2ANDR-RC508 Cover Letter(s) page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Confidentiality Letter
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
This document is a confidentiality request for FCC ID 2ANDR-RC508, submitted by SZ DJI Osmo Technology Co.,Ltd. The applicant requests long-term confidentiality for Schematics, Block Diagrams, Operational Descriptions, BOM List, Tune-up procedure, and Software Security Description, citing proprietary information harmful to their business. Additionally, short-term confidentiality is requested for External Photos, Internal Photos, Test Setup Photos, and User Manual(s) until the device is marketed or for 180 days from the grant date.
FCC ID 2ANDR-RC508 Cover Letter(s) page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Dec 20, 2025

DJI 'RC Mini' Controller Revealed in FCC Filings, Signaling Imminent New Drone Launch

In a significant development for the drone industry, regulatory filings have given us the first concrete evidence of a brand-new, unannounced remote controller from market leader DJI. An application for the "DJI RC Mini" (FCC ID SS3-TKMI2507) was approved on May 24, 2024, signaling an imminent product launch. This discovery points towards a major release before the end of the year, likely a new compact drone to accompany this advanced controller. * New Device Identified: An FCC filing has revealed the "DJI RC Mini," a new...

Read more →

Attestation Statements

Coverlist-attestation
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
The FCC ID 2ANDR-RC508, for equipment from SZ DJI Osmo Technology Co.,Ltd., is declared compliant with FCC rules regarding "covered" equipment. The applicant certifies that the device is not prohibited from receiving authorization and is not produced by an entity identified on the FCC's Covered List as of the filing date. Furthermore, the device's software is neither "covered" software nor capable of storing or running such software, ensuring inherent compliance. This declaration was signed by Niki Fang, Certification Supervisor, on 2025-11-14.
FCC ID 2ANDR-RC508 Attestation Statements page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Agent Letter
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
This document, a United States Designated Agent Letter dated 2025-11-27, concerns FCC ID: 2ANDR-RC508. SZ DJI Osmo Technology Co., Ltd., the applicant, designates DJI Research LLC as its U.S. agent. DJI Research LLC, located at 17301 Edwards Road, Cerritos, CA 90703, accepts service of process in the United States for matters related to this equipment. Both parties acknowledge the applicant's obligation to maintain an agent for service of process for at least one year following the termination of marketing and importation in the U.S. or the conclusion of any Commission-related proceedings.
FCC ID 2ANDR-RC508 Attestation Statements page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Applicant_declaration_letter
Submitted: Jan 17, 2025
Available: Jan 17, 2025
View PDF
Report
The FCC ID 2ANDR-RC508 is associated with SZ DJI Osmo Technology Co.,Ltd., located in Shenzhen, China. The applicant declares that all information provided for this equipment authorization is true and accurate. They acknowledge responsibility for correct FCC ID and compliance labeling on the device. The applicant confirms arrangements with the manufacturer to ensure ongoing FCC compliance for production units. Furthermore, they understand and accept their role as the responsible party, including post-market surveillance requirements, and agree to provide production samples for testing upon request by regulatory bodies.
FCC ID 2ANDR-RC508 Attestation Statements page 1 by SZ DJI Osmo Technology Co.,Ltd.
Page 1
Dec 17, 2025

DJI 'Lito 1' Controller With Wi-Fi 6 and SDR Surfaces in FCC Filings, Hinting at Next-Gen OcuSync Tech

A new device from drone giant DJI, the 'DJI Lito 1,' has been revealed in recent FCC filings, pointing to a near-future launch of a next-generation remote controller. The filings detail a device packed with advanced technology, including Wi-Fi 6 and Software-Defined Radio (SDR), the latter being the core of DJI's industry-leading OcuSync transmission systems. Evidence from the technical documents confirms the Lito 1 is a handheld controller with a user-replaceable battery and a dedicated UAV antenna system, poised to set a new standard for drone connectivity....

Continue reading →